Loading ...

Sensor for environmental monitoring air temperature

Systems for environmental monitoring and remote control

Snow Temperature profiler


Temperature profiler for snow cover, made with a pole in anodized aluminium and white painted and with 12 high accuracy temperature sensors (Pt100 1/5 DIN) places on adjustable and removable arms up to 25cm away from border pole, to appreciate small temperature differences between the various points. The measurements start from ground level up to a maximum of 250 cm height. The arms with the sensors mounted on their head, are arranged radially around the pole, to reduce the physical interference among them and ensure that each sensor is fully immersed in the snow at its corresponding level. Each arm is also installed with a specific angle (about 10°) that limits the stay of snow in its surface during the denouement.
The distance between the individual sensors changes according to the height from the ground. All sensors are inserted in a special terminal in Teflon and are easily interchangeable thanks to a special IP68 screwed connector.
The sturdy structure, fixed to a base thanks to a special plate, is designed for cable routing. All sensors have a 4-wire cable and can be connected to an acquisition system via terminals.


  • Accurate and reliable Snow Temperature Profiler
  • 12 measuring points distributed over 250cm height
  • Measure with RTD Pt100 1/5 DIN
  • According to WMO standards
  • Double hole for cable routing to and from the terminals
  • Anticorodal Aluminum body with size and weight compact
  • Interchangeable Teflon coated sensors with IP68 connectors
  • Range: -40 ÷ +60°C
  • Resolution: 0.005°C
  • Accuracy: DIN 43760 1/5 DIN (±0.06°C @ 0°C)
  • Response time: <6s
  • Operating conditions: : -60 ÷ +80°C, 0 ÷ 100% RH
  • Output signal: Pt100 4 wires for each measuring point
  • Power supply: 10÷30Vdc



Bracket / Arm Support

Fixing system for Nesa's sensors, composed by an arm of different lengths (50cm, 90cm, 150cm) and thermoplastic resin clam for external, able to withstand to extreme temperature and to solar radiation.
Two stainless steel screws for the tightening of the clamp on the sensor complete the equipment.


MCS Signal Conditioning Module

Single channel module for conditioning digital and analog electrical signals. Fully programmable for binding input/output with the USB interface available as an option. The full data sheet is available at this address. main features:

  • Programmable input signals: Pt100, thermopiles, Voltages up to 2Vdc, Current 0÷20mA or 4÷20mA, frequency up to 1000Hz, Counter for pulses (1ms min)
  • • Programmable Output signals: voltage 0÷2Vdc; Current 0÷20mA or 4÷20mA Serial RS485 (command line); Modbus RS485
  • • Resolution: 18 bits with over 262,000 points
  • • Operating conditions: -40 ÷ +80°C
  • • DIN rail mounting
  • • Power supply: 10÷30Vdc (typ. 4mA@12 Vdc)



NPI shielded cable. With IP68 waterproof connector for connecting to the sensor, and terminal sleeves for insertion into the terminal blocks. Available in any length.


Standard cable

Shielded multi-core cable for indoor/outdoor use, suitable for hot and cold climates.
With IP68 waterproof connector for connecting the sensor, and PS2 plug connector for direct connection to the data logger or with terminal sleeves for insertion into the terminal blocks. Our cables are standard for most our sensors.
Available in different lengths starting from 1m.

We remain at you disposal for further information

Use the contact form below to submit your request.
All the personal data entered will be used only to answer your inquiries

* Required fields
Enter your data and request
Otherwise call us at +39 0423.985209

NESA Srl - Via Crociera, 11 - 31020 - Vidor (TV) - Italy
Tel+39.0423.985209 - Fax+39.0423.985305
e-mail: info@nesasrl.it
C.F. e P.IVA. 01422830990